RELTEST 1000

Aplication
The use of RELTEST is extremely easy: once conenctions are performed, the operator can select the desidered test by a menu. Tests can be performed locally or by PC control. Test results are automatically saved and then downloaded in the PC using the software TDMS, provided with the test equipment, for final storage and printing.
TECHNICAL SPECIFICATIONS
THREE VOLTAGE OUTPUTS

• Three AC voltage outputs, separately adjustable. Output range (phase voltage): from 0 V to 100 V AC o 400 V AC.
• Connection: 4 safety sockets (3 phases and a common neutral).
• Possibility to set the amplitude of the outputs independently for each output, continuously.
• Accuracy: ± 0,5% of the output, ± 0,2% of the range.
• Distorsion: 0,1%.
• Angles between the voltages: adjustable from 0° to 360 °.
• Resolution: 0,5°; accuracy: 1°.
• Voltage outputs have the neutral in common and are isolated from mains and ground.
• Power available for each phase: 20 VA continuously, at the maximum voltage.
• Possibility to set independently the pre-fault and the fault output amplitudes.

FOURTH VOLTAGE GENERATOR
The test equipment is provided with a fourth voltage output, with the neutral in common with the three phase voltages, adjustable separately from the phase voltages.

• Voltage ranges: 13 V or 130 V AC.
• Possibility to set the output amplitide from zero to the maximum value, continuously.
• Connection: 2 safety sockets.
• Accuracy: ± 0,5% of the output, ± 0,2% of the range.
• Resolution: 6 mV on the 13 V range, 60 mV on the 130 V range.
• Distortion: 0,1%.
• Angle: adjustable from 0° to 360°.
• Resolution: 0,5°; accuracy: 1°.
• The output is isolated from mains and ground.
• Available power: 6 VA continuously, at the maximum voltage.
• Possibility to set independently the pre-fault and the fault output amplitudes.